Skip to content
WellholtAquarium & terrarium tools for every keeper.

Equipment & Environment · Free tool

Aquarium Lighting PAR Estimator by Depth and Water Clarity

Estimate light intensity below the water surface from surface PAR and an assumed attenuation factor.

Keep your tank details on this device. Set up your tankSaved locally in this browser. Sign in to sync and back up when account sync is configured.
Use fixture data or a meter reading. This is an estimate, not a substitute for measurement.
Clear water 0.01; typical moderate 0.02; stained/cloudy 0.04 are rough assumptions.
Your resultEnter your values to calculate.

How this calculator works

Estimated PAR at depth = surface PAR × e^(−attenuation × depth). The attenuation coefficient is an assumption; use a PAR meter for real measurements.

Before you rely on the result

Outputs are estimates. Verify units, test actual conditions, and check species-specific and manufacturer guidance before buying equipment or changing the enclosure.

Practical guide

Aquarium PAR estimator by depth

Photosynthetically active radiation, or PAR, describes the light range used by photosynthetic organisms. In an aquarium, the light level at plant leaves can differ from the fixture’s output at the surface. This estimator illustrates the effect of water depth using a selected attenuation assumption. It is useful for planning, but it does not measure real light in your aquascape.

Consider the point where the plants grow

A surface reading alone may not describe the light reaching low carpeting plants or shaded stems. Distance through the water, fixture height, spread, surface movement and suspended material all affect distribution. Hardscape and leaves also create shadows. Enter a surface PAR value from a meter or reliable fixture data and the distance through the water to the area you want to estimate.

The attenuation setting is an assumption

Clear, stained or cloudy water can reduce light in different ways, and the amount is not constant for every aquarium. The calculator uses a simplified model to show the trend, not to predict an exact reading. A PAR meter at the actual plant height is the better choice when precise light levels matter, especially for demanding plants or when adjusting a high-output fixture.

Balance light with the rest of the planted tank

Plant response depends on the species, nutrients, carbon availability, water movement and photoperiod as well as PAR. Increasing brightness or extending the day can increase demands elsewhere and may aggravate algae if plants are not able to use the added light. Make changes gradually and record the fixture height, intensity, daily schedule and observed plant growth.

Common questions

Frequently asked questions

Can this estimator replace a PAR meter?

No. It illustrates a depth-related estimate using assumptions. A PAR meter provides a direct reading at the location of interest.

Does higher PAR always mean better plant growth?

No. Plant needs differ, and growth also depends on nutrients, carbon, duration, species and other conditions. Excessive light can make balance harder to maintain.

Why is PAR lower near the substrate?

Light can be absorbed and scattered as it travels through water, and hardscape or leaves may shade the measurement point. Fixture placement and water clarity matter too.

Important: WellHolt tools provide estimates and educational guidance, not veterinary, medical, electrical or engineering advice. Follow product labels and species-specific husbandry guidance.