Home repair costs in Dallas, TX

The house this page is using

If you are pricing a water heater, a mini-split, or a move to Dallas, start with the house this page uses as an example: built around 1985, about 2,000 square feet. suburban frame houses on slabs, attic ducts, hot-humid summers You will see a low, a typical, and a high. A fair bid for that same job should land inside the range. A bid far above the high number is either a different job or a number you should question.

Jobs people actually price in Dallas

A straightforward 40-gallon electric water heater replacement in Dallas typically costs $1,730, with a range of $1,350 to $2,310. A window air conditioner for one room is typically $610. A single-zone mini-split for the example home is typically $7,370, from a cooling sketch of about 54,200 Btu/h. A local move for a two-bedroom household is typically $1,470. Those are installed or move-day figures, not a re-pipe, not a whole-house air conditioner, and not a cross-country truck.

An 80,000 Btu gas furnace, same ducts, typically costs $4,530 in Dallas. A roof on the example home — planning area 2,300 square feet, not a measurement — typically costs $15,380 to tear off and reshingle. Open-attic cellulose aimed at R-49 typically costs $3,340. A planning year of gas heat is about $810 at the $1.50 a therm you typed in the bar. Heat-pump heat at the local electric rate is about $880. Cooling is about $960. Each of those has its own page so the numbers are not mashed into one “home cost.”

What is local here, and what is not

Dallas is in IECC climate zone 3A. A typical year here has about 2,240 heating degree days and 2,750 cooling degree days, against 4,000 and 1,400 in the national reference. Local labor is 0.97 times a national crew, which is 3% lower. Planning electricity is 14.5¢ per kilowatt-hour, 2.3¢ below 16.8¢. Oncor delivers; retail plans vary. Hail and attic heat are the local equipment risks, not the posted rate.

Dallas is priced near a national labor factor and well above national cooling hours. The typical house in this model is a suburban slab with the air handler in the attic, not a downtown high-rise. Hail-damaged condensers and undersized attic ducts are why replacements happen, and they are not included in a 'swap the box' range.

Rent, sitting next to the repair on purpose

A one-bedroom planning rent is $1,450 a month. A two-bedroom is $1,850. These are not listings. They sit next to the repair prices so a low labor rate is not mistaken for an affordable city. On a $72,000 household income, that two-bedroom is about 31% of gross monthly income. Put your own income in the move calculator. If you rent, a window unit and a move are usually your decision. A water heater, an electrical panel, or a mini-split on the outside wall belongs to the owner. Use the range to read their quote.

How to use this without fooling yourself

Set your city to Dallas at the top of the page, then open the calculator for the job you are actually pricing. Your square footage replaces the 2,000 square foot example. The gas line follows the price per therm in that same bar. Low means an easy version of the same scope. Typical means the example house. High means the same machine with worse access, a code fix, or a second trip. Reviewed 2026-09-01. Planning model: IECC climate zone, degree-day normals, a metro labor factor, and a residential rate used only for operating-cost context. Installed costs start from published national ranges and scale the labor share. Rents are planning medians, not listings. Reviewed 2026-09-01. Ask for the written scope before you compare any bid with the high number.