Skip to content
WellholtAquarium & terrarium tools for every keeper.

Water Chemistry · Free tool

Saltwater Mixing Calculator: Estimate Salt for Your Target Salinity

Estimate salt mass for a target salinity. Actual salt mixes vary; follow the product manufacturer.

Keep your tank details on this device. Set up your tankSaved locally in this browser. Sign in to sync and back up when account sync is configured.
Approximate mass assumes about 1 g/L per ppt; follow salt-mix manufacturer instructions.
Your resultEnter your values to calculate.

How this calculator works

A rough mass estimate is volume in litres × target salinity in parts per thousand, expressed as grams of dissolved salts. Verify the result with specific gravity.

Before you rely on the result

This estimate can affect livestock health. Follow the manufacturer’s directions, verify actual water volume and confirm changes with reliable tests. Make changes gradually where appropriate, and seek qualified aquatic-veterinary or husbandry advice for illness or uncertainty.

Practical guide

Saltwater mixing and salinity calculator

Preparing saltwater begins with a target salinity and a known volume of water, but the amount of salt required varies by product. This calculator gives a rough mass estimate to help with preparation. The final decision should come from a calibrated salinity measurement and the instructions for the salt mix you are using.

Start with volume and a suitable target

Enter the amount of water you are preparing and the target salinity. Make sure the volume is expressed in litres as requested by the calculator. A target around a familiar reef or marine value is not automatically right for every system, animal or purpose. Check the species’ requirements and the salt product’s directions before mixing a new batch or making an adjustment to an existing aquarium.

Why the estimated salt mass is only a starting point

Commercial marine salt mixes contain different blends of salts and other compounds, and their relationship between mass and salinity can vary. Water temperature and measuring equipment also influence readings. Add salt according to the manufacturer’s instructions, allow it to dissolve and mix thoroughly, then check salinity with a suitable, calibrated instrument. Do not assume the calculated mass is the final measurement.

Avoid abrupt salinity changes

For an established marine aquarium, replacement water should usually be prepared to an appropriate salinity and temperature before use. A sudden change can stress fish and invertebrates, and some systems need special procedures for evaporation top-off. Keep a log of salt brand, measured water volume, amount used and final salinity so the next batch is easier to reproduce.

Common questions

Frequently asked questions

How much marine salt do I add per litre?

The amount varies by salt mix and target salinity. Use the calculator for a rough estimate, then follow the product instructions and verify the mixed water with a calibrated salinity instrument.

Can I use this salt mass as the final salinity check?

No. Dissolving behavior and product composition vary. Measure the finished water and make any adjustment gradually according to the manufacturer’s guidance.

Should replacement saltwater match the aquarium?

In most routine water-change situations, prepare replacement water to an appropriate temperature and salinity for the system. Follow specific husbandry advice for sensitive livestock or special procedures.

Important: WellHolt tools provide estimates and educational guidance, not veterinary, medical, electrical or engineering advice. Follow product labels and species-specific husbandry guidance.