Skip to content
WellholtAquarium & terrarium tools for every keeper.

Volume, Dimensions & Structural · Free tool

Cube Aquarium Volume Calculator: Calculate a Square Tank in Gallons and Litres

Cube aquariums have a square footprint, so their volume is calculated from one side length and the height of the water column. This calculator is useful when planning a cube-style aquarium, checking an advertised capacity or estimating water volume for routine maintenance. It allows a partially filled tank by using the water height instead of assuming that the tank is filled to the top.

Keep your tank details on this device. Set up your tankSaved locally in this browser. Sign in to sync and back up when account sync is configured.
Measure one side of the square base.
Must be no greater than the side length in this cube-style model.
Use the same unit for both dimensions.
Your resultEnter your values to calculate.

How this calculator works

For a square footprint, estimated volume = side length² × water height.

Before you rely on the result

This calculator assumes equal length and width and vertical walls. It does not subtract displacement from substrate and décor. If the tank is not square, use the rectangular aquarium calculator instead.

Practical guide

Cube aquarium volume planning guide

Cube aquariums have a square footprint, so their volume is calculated from one side length and the height of the water column. This calculator is useful when planning a cube-style aquarium, checking an advertised capacity or estimating water volume for routine maintenance. It allows a partially filled tank by using the water height instead of assuming that the tank is filled to the top.

Use the internal side measurement

Measure one side of the square base from the inside of the glass. In a true cube, the other side is the same length. Use the water height that you normally maintain, not the full outside height if you leave headspace at the top. If your aquarium is wider in one direction than the other, calculate it as a rectangular tank rather than a cube.

How the calculator estimates capacity

The tool squares the side length to find the footprint area and multiplies it by water height. The result is converted into litres and US gallons. Cubic measurements magnify input errors, so take care to measure the inside dimensions and confirm the selected unit before relying on the answer. The output describes geometric space, not an exact filled-water reading.

Account for displaced water

Substrate, rocks, driftwood and equipment take up space that would otherwise hold water. Keep this in mind when estimating water-change volume, filter turnover and product requirements. A cube tank’s capacity also does not prove that it provides enough horizontal swimming space or territory for a particular species. Use adult size, behavior, water parameters and maintenance needs to make a responsible stocking plan.

Common questions

Frequently asked questions

Can I enter a water height lower than the side length?

Yes. The water height represents the actual water column. It must be positive and cannot exceed the side length in this cube-style calculation.

What if my aquarium is not perfectly square?

Use the rectangular aquarium volume calculator and enter its separate internal length and width.

Will the result match the tank’s advertised litres?

It may be close, but advertised capacity may use different dimensions or a full-to-rim measurement. Waterline, glass, substrate and décor change the usable volume.

Important: WellHolt tools provide estimates and educational guidance, not veterinary, medical, electrical or engineering advice. Follow product labels and species-specific husbandry guidance.