Skip to content
WellholtAquarium & terrarium tools for every keeper.

Volume, Dimensions & Structural · Free tool

Cylindrical Aquarium Volume Calculator: Estimate Gallons and Litres

A cylindrical aquarium uses a circular footprint rather than the rectangular footprint used in many common volume calculators. The cylindrical volume formula multiplies the circular base area by water height. This calculator uses the internal diameter and actual water column so you can estimate capacity in litres and US gallons for routine planning.

Keep your tank details on this device. Set up your tankSaved locally in this browser. Sign in to sync and back up when account sync is configured.
Measure straight across the widest part inside the tank.
Measure the water column, not the tank exterior.
Use the same unit for diameter and height.
Your resultEnter your values to calculate.

How this calculator works

For a cylinder, volume = π × (diameter ÷ 2)² × water height.

Before you rely on the result

This assumes a true cylinder with a circular base and vertical sides. It does not account for substrate, décor, internal equipment or a deliberately lowered waterline beyond the height entered.

Practical guide

Cylindrical aquarium volume guide

A cylindrical aquarium uses a circular footprint rather than the rectangular footprint used in many common volume calculators. The cylindrical volume formula multiplies the circular base area by water height. This calculator uses the internal diameter and actual water column so you can estimate capacity in litres and US gallons for routine planning.

Measure the inside diameter

Measure across the widest point of the circular interior, ideally at the base where the tank is widest and not across the outside rim. Use the normal water height, leaving out the empty space above the waterline. If the vessel narrows toward the top or has a curved base, a simple cylinder formula will not capture those differences.

Why the diameter has a squared effect

The area of a circle is π times the radius squared, and the radius is half the diameter. That means a small measurement error in the diameter can influence the resulting area more than the same absolute error in height. Take care with the measurement, use consistent units and check your result against the dimensions or nominal capacity supplied by the manufacturer.

Use capacity as one planning input

An estimated volume can support filter selection, heater planning and maintenance records. Actual water volume will be lower once substrate, rocks, plants and internal equipment displace water. Cylindrical aquariums can also differ from rectangular tanks in swimming space and surface layout, so volume alone does not establish suitable stocking. Choose livestock for the footprint, adult requirements and water conditions, and follow relevant equipment instructions.

Common questions

Frequently asked questions

What is the difference between diameter and radius?

Diameter is the full distance across the circle; radius is half of that distance. This calculator asks for diameter and divides it by two internally.

Can I use the outside diameter?

Use the inside diameter where possible. Outside dimensions include the tank wall and can overestimate the water capacity.

Does a cylinder hold the same volume as a rectangular tank of the same height?

Only if their footprint areas are the same. Compare the actual base areas and water heights rather than comparing just one dimension.

Important: WellHolt tools provide estimates and educational guidance, not veterinary, medical, electrical or engineering advice. Follow product labels and species-specific husbandry guidance.